|
|
 |
|
Instrumentation and Process Control
Author(s): Janardan Prasad, M.N. Jayaswal, Vishnu Priye
ISBN: 9789380026572
No. of Pages: 400
Publishing Year: 2010
Binding: Paperback
Dimension: 16cm x 24cm
Weight: 505
Subject: Electrical Engineering
Price:
Rs 225.00 $ 22.00 £ 11.00
|
|
|
|
|
| About the Book:
|
| Instrumentation and control system is the heart of all processing industries. No process can run without the aid of instrumentation. Therefore, sometimes it is said that instruments are eyes of process through which a process operators visualize the process behaviour.
Instrumentation and control concepts have undergone a drastic change over the past few years.
The book is meant for the graduate level course of Instrumentation and Process Control (Electrical & Electronics and Instrumentation & Control disciplines).
The topics have been divided in 8 chapters. The first three are devoted to Transducers. In these chapters, stress has been given on Transducer Signal Selection, Pneumatic Transmitters, Smart Transmitters, Special Class Thermocouple, Nucleonic Level Gage, Electronic Level Gage & others. In the chapter on Telemetry, pneumatic transmissions have been added in addition to usual topics. In the chapter Process Control, three element control systems have been described through examples of Boiler Drum Level Control. And lastly in Recent Developments & Microprocessor Based Instrumentation System, development of PLC and distributed control system and instrumentation communication protocol have been described in greater detail with suitable examples.
The book is a perfect match of instruments that are still in use and which have been recently developed. |
|
|
| Contents: |
| Preface
Acknowledgements
1. TRANSDUCERS–I
1.1 Introduction / 1.2 Definition of Transducer / 1.3 Classification of Transducer / 1.4 Inverse Transducer / 1.5 Characteristics of Transducers / 1.6 Transducer Elements / 1.7 Secondary Transducer Element
2. TRANSDUCERS–II
2.1 Elements of Instrumentation System / 2.2 Transducers and Measurement of Pressure / 2.3 Measurement of Displacement, Velocity / Acceleration and Torque
3. TRANSDUCERS-III
3.1 Transducers and Measurement of Temperature / 3.2 Other Considerations / 3.3 Measurement of Flow / 3.4 Measurement of Level
4. TELEMETRY
4.1 Introduction / 4.2 Cable Telemetry (Landline System) / 4.3 Analog Telemetry / 4.4 Pulse Telemetry / 4.5 Digital Telemetry / 4.6 RF Telemetry / 4.7 Telemetry in Electrical Power System
5. SIGNAL CONDITIONING AND DATA ACQUISITION SYSTEM
5.1 Introduction / 5.2 Signal Conditioning / 5.3 Multiplexing / 5.4 Accuracy of Digital Meter / 5.5 Aperture Time for Sample and Hold Mechanism
6. PROCESS CONTROL
6.1 Introduction / 6.2 Proportional Control / 6.3 Integral Control / 6.4 Derivative Control / 6.5 Proportional-cum-integral Control (PI Control) / 6.6 Proportional-cum-integral-cum-derivative (PID) Control / 6.7 Integral Windup / 6.8 Electronic Controller / 6.9 Pneumatic Controller / 6.10 Selection of Control Technique / 6.11 Three-element Control (Concept of Feed Forward)
7. DISPLAY DEVICES AND RECORDERS
7.1 Recorders / 7.2 X-Y Plotter / 7.3 Digital Data Display Devices
8. MICROPROCESSOR BASED INSTRUMENTATION SYSTEM
8.1 Introduction / 8.2 Interface System Techniques / 8.3 Microprocessor Based Programmable Controller / 8.4 Bus System, Interrupt Services and Communication Protocols / 8.5 PLC (Programmable Logic Controller) / 8.6 DCS (Distributed Control System)
Bibliography
Index. |
|
| Audience: |
| Postgraduate and Undergraduate students of Electrical & Electronics Engineering |
|
| Shelving: |
| Electrical and Electronic Engineering, Instrumentation and Control Engineering |
|
| |
| |
|
Specimen
Request
