Engineering Drawing: With Auto CAD, 3/e
View Larger

Engineering Drawing: With Auto CAD, 3/e

Author : B V R Gupta & M. Raja Roy
© Year : 2016
ISBN : 9789384588960
Pages : 432
Binding : Paperback
Weight : 0.57   kg
Price :   33.00

Request a Specimen Copy

Buy online using : Credit Card / Debit Card / Internet Banking

  • About the Book
  • Salient Features
  • Table of Contents
  • About the Author

Engineering Drawing is a common subject offered in all branches of engineering. It helps one to express his or her ideas into reality through drawing. This book helps both faculty and students to understand the concepts on their own. The book presents the concepts through a step-by-step approach, with important points to remember duly highlighted. Various worked-out examples and problems in the exercises are presented under various categories so that the students can attempt any particular type of problem they want to. This third edition includes short answer questions, with answers for each chapter. Some new pictures have been added in each chapter apart from figures for easy understanding of the subject. New figures have also been added at places for a clear imagination of that particular object. Figure quality has also been improved.

Salient Features:

  • Covers projection techniques in detail, including orthographic, isometric and perspective projection.
  • Provides 143 problems of various grades, with step-by-step solution.
  • Includes a dedicated chapter on computer-aided drawing, accompanied by screenshots, commands and examples.
  • Includes many figures in 3D for better understanding, and BIS standards appropriately.
  • Includes short questions and answers (Appendix I), and chapter-wise pictures (Appendix II).
  • Includes end-of-the-chapter exercises and university examination problems.

1. Introduction and Scales
2. Curves
3. Orthographic projections
4. Projections of points
5. Projections of straight lines
6. Projections of planes
7. Projections using auxiliary planes
8. Projections of solids
9. Projections of sections of solids
10. Development of surfaces of solids
11. Intersection of surfaces of solids
12. Isometric projections
13. Perspective projection
14. Conversion of isometric into orthographic views
15. Computer aided drawing
Appendix-I Short Question and Answers
Appendix-II Pictures
Abbreviations, symbols and notations

B V R Gupta :- B.V.R.Gupta did his B.E (Mech) from the Government College of Engineering, Anantapur; ME (Marine Engineering) from Andhra University College of Engineering, Visakhapatnam and Ph.D. from IIT-Madras, F.I.E., M.I.S.T.E. Presently he is Principal of Visakha Institute of Technology and Sciences, Sontyam, Visakhapatnam. Formerly he was Professor and Chairman, Faculty of Engineering, Andhra University College of Engineering, Visakhapatnam, A.P. and served in various capacities for 34 years before superannuation. Later he served as Professor and Head of Mechanical Dept. at ANITS, Visakhapatnam; Principal of Sri Sai Spoorthi Engineering College, Sattupalli, and also Avanthi Institute of Technology and Sciences, Visakhapatnam affiliated to JNTU.

Raja Roy, BE (Mech) from Bapatla Engineering College and ME (CAD/CAM) from Andhra University, is an expert in CAD, web designing and programming. He has designed a portal named for the benefit of students. Presently he is working as Asst. Professor in ANITS, Visakhapatnam since last 4 years.

M. Raja Roy :- M. Raja Roy did his B.Tech (Mech) from Bapatla Engineering College, Bapatla affiliated to Nagarjuna University and M.E (CAD/CAM) from Andhra University, Visakhapatnam. He is an expert in CAD and web designing & programming. He also designed a portal named, for the benefit of students. He worked in Infotech Pvt. Ltd as a CAD engineer and as a software engineer in Phoenix IT Solutions Pvt. Ltd. Presently he is a Senior Assistant Professor at ANITS, Visakhapatnam.

Your Browsing History

Engineering Drawing

By : B V R Gupta

Price : 33.00

Coming Soon


Top Sellers

Redefining Indian Smart & Sustainable Cities

Redefining Indian Smart & ...

By : Charanjit S Shah

Discount : 20.00 %

Price :   175.00    

Customers who saw this book also saw

Charles Darwin’s Plough Tool for Vermitechnology

Charles Darwin’s Plough Tool ...

By : Madhab Chandra Dash

Discount : 20.00 %

Price :   245.00      196.00

Innovative Approach of Physicochemical Analysis

Innovative Approach of ...

By : Man Singh

Discount : 20.00 %

Price :   180.00      144.00

Port Management and Operations

Port Management and ...

By : Maria G. Burns

Discount : 20.00 %

Price :  

Thermal Metal Cutting Processes

Thermal Metal Cutting ...

By : B.J. Ranganath

Discount : 20.00 %

Price :   26.00      20.80