Processing and Fabrication of Advanced Materials- XXII (Two Volumes Set)  , 1/e
View Larger

Processing and Fabrication of Advanced Materials- XXII (Two Volumes Set) , 1/e

Editor : Naresh Bhatnagar & T.S. Srivatsan
© Year : 2008
ISBN : 9788190777025
Pages : 1320
Binding : Hardback
Weight : 2.37   kg
Discount : 20.00  %
Price :   510.00      408.00
Buy Now

Request a Specimen Copy

Buy online using : Credit Card / Debit Card / Internet Banking

  • About the Book
  • Salient Features
  • Table of Contents
  • About the Author

This interdisciplinary technical publication provides a lucid, comprehensive, convincing and compelling overview of the current state of the art and ongoing progress on aspects related and most relevant to the ever fascinating domain of processing and fabrication and its intrinsically interwoven relationship with materials spanning both the existing and emerging, which can be safely categorized as advanced. The spectrum of materials examined include the metallic, intermetallics, ceramics, ceramic-matrix composites, metal-matrix composites, intermetallic-matrix composites, polymers, polymer-matrix composites, semiconductor materials, biomaterials and even orthopedic materials. The volumes contain a healthy collection of papers, immaculately compiled and articulately assembled, put forth by practicing engineers, technologists, research scientists and academician from 13 countries. Spread in twelve sections which include 84 technical papers, these volumes cover the following areas: 01. Processing of Metals, Metallic Materials and Metal Matrix Composites 02. Behavior of Metals, Intermetallic and Metal-based Composites 03. Advances in Metal Machining and Fabrication Techniques 04. Advances in Welding Processes 05. Metallic Foams 06. Micro-electronic Materials: Fabrication and Analysis0 07. Materials: Failure, Wear and Structural Analysis 08. Polymer-based composites and Nano-Composites 09. Manufacturing, Defects and Analysis of Composite Materials 10. Processing, Fabrication and Behavior of Polymeric Materials 11. Biomaterials and Bio-composites 12. Orthopedic Materials.

Salient Features:

  • Spread in 12 sections, this volume includes 84 peer-reviewed articles covering aspects related to processing and fabrication.
  • A wide variety of materials has been covered, many of which are emerging.
  • Each article has an abstract, introduction and conclusion apart from the paper per se.
  • Contributed by eminent academicians

    Volume I
    Part 1:
  • Processing of Metals, Metallic Materials & Metal Matrix Composites
  • On the use of Titanium Alloys for Aerospace and Non-Aerospace Applications
  • Processing of Metal Matrix Composites for Automotive Applications : Challenges and Prospects
  • Recent Trends in Production, Processing and Applications of Shape Memory Alloys
  • Fabrication and Processing of Magnesium Sheets
  • Challenges in the Processing and Fabrication of Novel Phosphoric Irons
  • Continuous Severe Plastic Deformation (CSPD) Processing of Aluminum Alloy 6061
  • Some Studies on Quaternary Additions of Zinc, Iron & Cromium on Copper-Aluminum Manganese Shape Memory Alloys
  • Fabrication of Multi-material Components by Laser Rapid Manufacturing and their Characterization
  • Melting and Solidification Behaviour of Pb-Sn Alloy Nano-Particles Embedded in Quasicrystalline Matrices
  • Properties and Characteristics of Mg-Al Blended and Compacted Composites

  • Part 2:
  • Behaviour of Metals, Intermetallics and Metal Based Composites
  • Effect of Cross-sectional Geometry and Solute Content on the Tensile Properties of High Pressure Die Cast Mg-Al Alloys
  • Mechanical Properties of Alumina-Zirconia Nanocomposite (Nano ZTA) Fabricated by Gelcasting
  • The Intrinsic Influence of Nano-length Scale Metal and Ceramic Reinforcements on Strength, Ductility and Work of Fracture of Magnesium
  • The Microstructure and Hardness of Aluminum Oxide Prepared by Consolidating Powders by the Technique of Plasma Pressure Compaction
  • Fracture Toughness and Fatigue Crack Growth Characterization of Laser Rapid Manufactured In-625
  • Cyclic Oxidation Behaviour of Nanostructured Cr
  • Al Multilayer Coating on Superalloy Substrate

  • Part 3:
  • Advances in Metal Machining & Fabrication Techniques
  • Processing of Self-lubricating Cutting Tool Material
  • Laser Engraving Machine for Gravure Printing Copper Roller
  • Using Ultrasonic Vibration for Increasing the Performance of Grinding Process of Fine Ceramics
  • On the Influence of Processing Method: Hot Pressing versus Plasma Pressure Compaction on Microstructural Development and Hardness of Boron Carbide Samples
  • Optimization and Modeling of Process Parameters in Ultrasonic Machining Process

  • Part 4:
  • Advances in Welding Processes
  • Experience with Tantalum as Cathode Holder: Future Directions for Improvements
  • The Influence of Tool Design in Governing the Mechanisms of Formation of a Friction-stir Weld
  • Fabrication of Skin Stiffened Panels Made from High Strength Aluminum Alloys Using Friction Stir Welding and Friction Stir Spot Welding
  • Microstructure Evolution during Friction Stir Welding of AA 2219 and Comparison with Gas Metal Arc Welded Joint

  • Part 5:
  • Metallic Foams
  • Electrodeposited Nanocrystalline Hybrid Cellular Materials
  • Lost Foam Casting of Magnesium Periodic Cellular Materials
  • Synthesis and Mechanical Properties of Open-Celled Aluminium Foam

  • Part 6:
  • Microelectronic Materials: Fabrication and Analysis
  • Microelectronic Materials in Integrated Circuits and Manufacturing – An Introduction
  • Direct Wafer Bonding and Grinding
  • Etch Back Method for Fabrication of Thick Silicon-on-Insulator (SOI) Substrate
  • Fabrication of W-DLC Thin Films by HF-CVD Method
  • Study of Conductivity, Carrier Concentration and Mobility with Multilayer ZnO Film
  • Role of Octadecyltrichlorosilane on the Performance of Pentacene Based Organic Thin Film Transistor
  • Three-Dimentional Model to Study the Tetragonal to Orthorhombic Structural Phase Transition in YBa2Cu3O7-d
  • Nanocomposites of SiO2-PMMA for Optical Data Storage
  • Metamaterials at Optical Frequencies
  • Effect of Addition of Rhenium to Platinum as Electrocatalyst for Direct Ethanol Fuel Cell

  • Part 7:
  • Materials : Failure, Wear and Structural Analysis
  • Failure Analysis and Structural Integrity Assessment of Some Nuclear Components—Understanding Material Behaviour
  • Investigation of the Sliding of a Hard Indenter on a Soft Surface: Force and Morphology of Wear
  • Residual Stress Development at the Onset

Naresh Bhatnagar :- Professor Naresh Bhatnagar graduated from the Department of Mechanical Engineering, Indian Institute of Technology Bombay in the year 1992. He joined the Department of Mechanical Engineering at Indian Institute of Technology Delhi (IITD) in Nov 1998 as an Assistant Professor, after working in industry for 6 years. He was elevated to Associate Professor and subsequently became a Full Professor in the year 2008. He is actively involved in research in the area of Microcellular Injection Molding and Extrusion, Micro and Nano composites, Machining of Composites and Titanium, Medical Devices like Dental Implants, Orthopedic implants, Cardiac stents, Prosthetic and Orthotic Knee Joints, Light weight Ballistic materials etc. He has 10 patents/applications to his credit. He has published around 150 papers in international journals and conference proceedings.

T.S. Srivatsan :- Dr. T.S. Srivatsan, Professor of Materials Science and Engineering in the Department of Mechanical Engineering at the University of Akron. He received his graduate degrees [Master of Science in Aerospace Engineering (M.S. 1981) and Doctor of Philosophy in Mechanical Engineering (Ph.D. 1984)] from Georgia Institute of Technology. Dr. Srivatsan joined the faculty in The Department of Mechanical Engineering at The University of Akron in August 1987. His research areas currently span the fatigue and fracture behavior of advanced materials to include monolithic(s), intermetallic, Nano-materials and metal-matrix composites; processing techniques for advanced materials and nanostructure materials; inter-relationship between processing and mechanical behavior; electron microscopy; failure analysis; and mechanical design.

Your Browsing History

Processing and Fabrication of ...

By : Naresh Bhatnagar

Discount : 20.00 %

Price :   510.00      408.00

Buy Now

Top Sellers

Aircraft Instrumentation and Systems

Aircraft Instrumentation and ...

By : S. Nagabhushana

Discount : 20.00 %

Price :   113.00    

Advanced Mathematics

Advanced Mathematics

By : Chidanand S. Mujawar

Discount : 20.00 %

Price :   24.00    

Analytical Problems in Classical Mechanics

Analytical Problems in ...

By : Prathapan K.

Discount : 20.00 %

Price :   70.00    

Customers who saw this book also saw

Electric Drives

Electric Drives

By : D.P. Kothari

Discount : 20.00 %

Price :   20.00      16.00

Principles of Organic Farming

Principles of Organic Farming

By : Dr. L. P. Awasthi

Discount : 20.00 %

Price :   40.00      32.00

Introduction to Bar and Beverages

Introduction to Bar and ...

By : Mahendra Singh Negi

Discount : 20.00 %

Price :   50.00      40.00

Environment, 9th Edition

Environment, 9th Edition

By : Peter H. Raven

Discount : 20.00 %

Price :  

Plant Genetic Resources Conservation and Management

Plant Genetic Resources ...

By : Binay B. Mandal

Discount : 20.00 %

Price :   350.00      280.00